Region: AU  CN Asia

Steel Stanchions

stainless steel handrail

Stanchion Specifications

Monowills handrail and stanchions are available in three material types;
  • Steel (250)
  • Stainless Steel (316)
  • Aluminium (6063-T6)

Stanchion Spacing

Webforge Tubular Handrail Systems are manufactured to comply with Australian Standard AS 1657.

Specifications table

Kickplate Mounting Brackets

Specification 45mm x 50mm x 5mm long angle

All kickplate brackets are mounted right side when viewed from walking surface.
Note: Non-standard kickplate mounting brackets manufactured to order.
Slot allows 7mm up or down adjustment to kickplate.
Kickplate Mounting Brackets Steel
Dimensions for Various Stanchion Types Steel

40mm x 40mm x 6mm angle
P, S Stanchion
   80mm x 40mm x 6mm angle
SO Stanchion
   85mm long

Base Plates

Base Plates Steel

Base Plates

Dimensions for Various Stanchion Types Stainless and Alu
Base Plates Alu

Stanchion Weights


Pipe Sizes

The tolerances for pipes will depend on the pipe specification that is used.
  1. Variations in cross section
    Specified OD up to 50mm +/- 0.2mm
    Over 50mm OD to 75mm +/- 0.25mm
  2. Variations in thickness +/- 10%

Base Plates

All dimensions +/- 1mm
Thickness +/- 0.2mm

Sphere Drilling

Drilled diameters 2 to 4mm oversize
Hole Angle +/- 1º in any direction (any 2 axis)
All stanchiones (except AM) +/- 0.5º in the slope direction only


The MonowillsTM range of handrails, stanchions, gates, etc., are available in a number of finishes.  

G Hot Dipped Galvanised
P Painted to project specifications
PC Powder Coated
A Anodised (aluminium only)
E Electropolished (Stainless Steel only)

Contact Us
Contact Us
Contact Us
Request A Quote
Webforge Asia operates throughout the Asia Pacific region in locations such as  India, New ZealandSingapore, Philippines, Indonesia, Thailand, Vietnam, Malaysia, China, and Australia.