Planking Products

Download product brochure (2.04 MB)

STEPBLOC
Slip-resistant serrated surface with raised perforations.

The upwards-perforated surface with its non-slip design provides a surface which gives superior grip properties that offers the highest safety. The oval-shaped openings permit liquids to run off easily, these openings provide a 37% open area and are sized to prevent a 15mm diameter ball passing through the openings.

Webforge supplies STEPBLOC manufactured from pregalvanised mild steel and the planks are supplied in a range of different heights, widths and thicknesses with the maximum length of 5.790m.

STEPCLAIR
Slip-resistant surface with both upward and downward facing holes.

The downward-perforated holes have a diameter of 18mm, whilst the upward-perforated holes have a diameter of 4.5mm, creating a plank with a 30% open area and aperature sizes that prevent a 20mm diameter ball passing through the openings.

The interplay between the prominent and recessed openings provides a secure foothold and at the same time allows liquids to drain freely off the surface. The STEPCLAIR profile is less aggressive than the STEPBLOC profile and has the advantage of allowing wheeled trollies to be pushed across its surface.

Webforge supplies STEPCLAIR manufactured from pregalvanised mild steel and the planks are supplied in a range of different heights, widths and thicknesses with the maximum length of 5.760m.