Fixing Clips
Download Fixing Clip Set Information (0.49 MB)
Clip Assemblies
The Webforge Clip (product code C001MG) is galvanised clip that consists of a pre-assembled 'clip top', M8Bolt and nut and a bottom bracket that captivates the nut, allowing fixing from the top of the grating. It enables rapid and secure connection of grating to steel support sections.
| Product |
Screw |
To suit flange |
To suit Webforge |
Grating Bar |
| Code |
Size |
thickness (mm) |
Grating type |
depth* D (mm) |
| C001MG |
M8x65 |
5-16 |
A,B,C,D,E,F |
Min 20 Max 50 |
* longer screws available for greater bar depth. Max bar depth = 65mm
The Lindapater Grate-Fast® (product code MLIND) is a galvanised Lloyds Approved anti-vibration clip that consists of a pre-assembled 'top hat' bracket, socket head capscrew and body casting. It enables rapid and secure connection of grating to steel support sections.
| Product |
Screw |
To suit flange |
Body casting |
To suit Webforge |
Grating Bar |
| Code |
Size |
thickness (mm) |
width (mm) |
Grating type |
depth* D (mm) |
| MLIND |
M10 |
3-19 |
20 |
A,B,C,D |
Min 20 Max 32 |
* longer screws available for greater bar depth. Max bar depth = 65mm
Tops
Bottoms
Screws/Rivets
Welding
Webforge believe that welding to the support structure is a suitable process. Minimum number of welds is four per panel. Grating: Weld 5mm fillet 25mm long at 1000mm centres. Expanded Mesh: Weld every fourth strand.
Clip Frequency
Norminal 4 per panel.
(Approximately 3 per M2 where span is > 1500mm. Approximately 5 per M2 where span is > 750mm or less.)
Fixing Clips are not generally recommended in areas of vibration or where lateral loads are applied to the grating.
®
