How to Order Flooring

Example of Coding


	Example of Coding

Examples:
F403AMP
G3861GG5

For the shaded items the resultant code would be A325MPG1

How to Order Flooring

Use the Quick Guide and add the options for Material, Top Surface, Treatment/Colours and Panel size (if required).
or
Choose a pattern and a Load Bar from the Load Deflection Table.
Panel size suffix should be stated only if you want a stock panel.
For example, A325MPU2 for an untreated stock panel 1200 x 6000.
For Fabricated grating the code would read A325MPU.
Specify whether the grating is to be Banded or Cut to Size Only by referring to the Terminology.
Nominate the number of panels required and provide dimensions for width and span of each panel.
Span is always the last dimension
Where large floor areas are required provide a drawing of the area to be covered showing:
- Dimensions.
- Span.
- Section size, location of, and toe direction of support steel.
- Location and size of cut outs and removable areas.
- Location and kick plate and nosings.
- Indicate if penetrations are required to be split.
Specify fastener type if required.

Span Direction

Grating and expanded metal have to be supported in a specific way. The direction that the load bars run is the important direction for grating and is referred to as the span.
For expanded metal the span is in the direction of the strands or Long Way Mesh (LWM).
Span is always the last dimension given when referencing a panel size.
Grating and expanded metal have to be supported 90° to the span direction and do not require support on the other sides.

Example:
Shown here with standard panel widths of 995mm. Platform made in standard stock width panels plus a make-up panel cut to the nearest load bar. The balance allows for gaps up to 10mm between panels.


	Span Direction

Order as:
1/4265 x 1500 span (in 4 pieces)
Make up panels are joined to the adjacent panel.